Challenger 44030AR HD 4-Post Hydraulic Alignment Lift 30,000 – New Black Color
SKU: 44030AR
Selling price:$33,099.75
Confirm fit, current options, delivery access, and documentation with Lift Care before purchase.
- Capacity: 30000 lbs
- Overall width: 12’ 5½”
- Maximum rise: 68"
Product Decision Guide
Key facts for this configuration
- Capacity
- 30000 lbs
- Overall width
- 12’ 5½”
- Maximum rise
- 68"
- Power requirement
- 3HP
Before You Order
Will this lift fit your bay and workflow?
Use the exact selected model and current manufacturer documentation to confirm the installation site, vehicle, utilities, and receiving plan.
Request a Product Fit CheckVehicle & Capacity
Confirm vehicle weight, weight distribution, wheelbase, and manufacturer lift points.
Bay & Clearances
Check overall width, length, ceiling height, door travel, and working clearance.
Floor & Utilities
Verify concrete, anchoring, electrical, and air requirements in the current manual.
Freight Receiving
Prepare carrier access, an available contact, and suitable unloading equipment.
Challenger 44030AR HD 4-Post Hydraulic Alignment Lift 30,000 – New Black Color
Challenger 44030AR HD 4-Post Hydraulic Alignment Lift 30,000 – New Black Color is cataloged by Challenger as an alignment lift with 30,000 lbs listed capacity. The sections below separate physical measurements, required utilities and configuration data for equipment selection.
Key product facts
- Manufacturer: Challenger
- Model: 44030 | 44030AR | 44030E | 44030EAR | 44030X | 44030XAR
- SKU: 44030AR
- Lift format: alignment lift
- Listed capacity: 30,000 lbs
- Power or motor requirement: 3HP
- Manufacturer-listed certification status: The supplied product data does not list this model as ALI certified.
Design and functional details
- Capacity detail: 30,000 lb. lifting capacity.
- Design detail: alignment-ready design with turning radius gauge cutouts and flush mount capability.
- Safety design: single point air actuated lock release disengages all column locks simultaneously.
- Platform design: diamond plate anti-skid runways and ramps.
- Platform design: built-in runway rail system.
- Construction: heavy duty, high tensile strength leaf chain with sealed roller bearings.
- Construction: heavy duty cylinder.
- Safety design: single point air actuated lock release system.
Available configurations and accessories
- Optional Voltage: Optional 3 Phase Voltage Instead of 1Ph
- Model Number: 44030; 44030AR; 44030E; 44030EAR; 44030X; 44030XAR
Technical specifications
| Specification | Recorded value |
|---|---|
| ALI | No |
| Weight Capacity | 30000 lbs |
| Model Number | 44030 | 44030AR | 44030E | 44030EAR | 44030X | 44030XAR |
| Lift Capacity | 30,000 lbs. |
| A Overall Length | 24' 7-1/2" | 29' 7-1/2" | 34' 7-1/2" |
| B Overall Width | 12’ 5½” |
| C Inside Columns | 132-1/2" |
| D Between Columns | 233-3/4" | 293-3/4" | 353-3/4" |
| E Overall Height | 92" |
| F Height of Runways | 9" |
| G Width of Runways | 24" |
| H Width Between Runways | 54" – 75" |
| I Maximum Wheelbase | 230" | 290" | 350" |
| J Rise Height | 68" |
| Max. 2 Wheel Align | N/A | 206" | N/A | 266" | N/A | 326" |
| Motor | 3HP |
| Voltage | 208v – 230v |
| Speed of Rise | 105 seconds |
| Amps | 30 |
| Shipping Weight | 5250 lbs (2381 kg) | 5450 lbs (2472 kg) | 5750 lbs (2608 kg) | 5950 lbs (2699 kg) | 6250 lbs (2835 kg) | 6450 lbs (2926 kg) |
| Optional Voltage | Optional 3 Phase Voltage Instead of 1Ph, No |
Compatibility and site review
Confirm vehicle lift points, weight distribution, clearances, floor conditions and required utilities against the current manufacturer manuals for the exact configuration selected. Product specifications can vary by model, voltage, height, length, runway, arm or accessory choice.
| Brand | Challenger |
|---|---|
| Weight Capacity | 30000 lbs |
| Rebate | This Item has a 75-Business Day Lead-time |
| Model Number | 44030, 44030AR, 44030E, 44030EAR, 44030X, 44030XAR |
| Lift Capacity | 30,000 lbs. |
| A Overall Length | 24′ 7-1/2″, 29′ 7-1/2″, 34′ 7-1/2″ |
| B Overall Width | 12’ 5½” |
| C Inside Columns | 132-1/2″ |
| D Between Columns | 233-3/4″, 293-3/4″, 353-3/4″ |
| E Overall Height | 92″ |
| F Height of Runways | 9″ |
| G Width of Runways | 24″ |
| H Width Between Runways | 54″ – 75″ |
| I Maximum Wheelbase | 230″, 290″, 350″ |
| J Rise Height | 68″ |
| Max. 2 Wheel Align | N/A, 206″, N/A, 266″, N/A, 326″ |
| Motor | 3HP |
| Voltage | 208v – 230v |
| Speed of Rise | 105 seconds |
| Amps | 30 |
| Shipping Weight | 5250 lbs (2381 kg), 5450 lbs (2472 kg), 5750 lbs (2608 kg), 5950 lbs (2699 kg), 6250 lbs (2835 kg), 6450 lbs (2926 kg) |
| Delivery Options | No, I Don’t Have a Forklift Please Call me to Discuss Options., I have a forklift for unloading at my listed shipping address. |
| Delivery Notice | I want a 24 hour Delivery Notice, I don’t want a 24 hour Delivery Notice |
Delivery Information
Plan for delivery before your lift arrives
Lift Care ships only within the United States and coordinates freight through Logistica Cargonam. Product-specific cost and timing are confirmed before ordering.
United States delivery
Orders are shipped only to destinations within the USA.
Shipping confirmation
Delivery cost and freight requirements are confirmed for the product and destination before ordering.
Heavy-freight receiving
Prepare carrier access, an available receiving contact, and suitable unloading equipment.
Inspect at delivery
Review the freight condition and document visible damage or missing parts before the carrier leaves.
Documents & Support
Review the exact product information
Specifications can change. Confirm the selected model against current manufacturer documents before installation or use.Related products
iDeal Lift 7000TLX Low-Rise, Portable & Storable Tilt Lift
Selling price:$755.00
iDeal Lift 7000TLX Low-Rise, Portable & Storable Tilt Lift
For buyers comparing portable vehicle lifts, iDeal Lift TLX-7000 combines a listed capacity of 7,000 lbs with a maximum lifting height of 22-1/2" -23-1/2" w/ Risers. The listing organizes the key dimensions, power information and configuration choices in a concise format. Confirm compatibility with the intended vehicle and work area using the manufacturer’s current technical instructions.
QuickJack™ 6000TLX Extended-Length Portable Car Lift 6,000 lbs
Selling price:$987.50
QuickJack™ 6000TLX Extended-Length Portable Car Lift 6,000 lbs
For buyers comparing portable vehicle lifts, QuickJack™ 6000TLX Extended-Length Portable Car Lift 6,000 lbs combines a listed capacity of 6,000 lbs with the principal dimensions and operating requirements. The listing organizes the key dimensions, power information and configuration choices in a concise format. Confirm compatibility with the intended vehicle and work area using the manufacturer’s current technical instructions.
AMGO® BP-9 Floor Base-Plate 2 Post Lift 9,000 lbs
Selling price:$1,167.50
AMGO® BP-9 Floor Base-Plate 2 Post Lift 9,000 lbs
For buyers comparing two-post vehicle lifts, AMGO Hydraulics BP-9CA combines a listed capacity of 9,000 lbs with a Symmetric configuration. The listing organizes the key dimensions, power information and configuration choices in a concise format. Confirm compatibility with the intended vehicle and work area using the manufacturer’s current technical instructions.
Katool KT-H100 Symmetric 2 Post Floor Plate Car Lift 10,000 lbs - Red
Selling price:$1,249.50
Katool KT-H100 Symmetric 2 Post Floor Plate Car Lift 10,000 lbs – Red
Katool KT-H100 brings together a two-post vehicle lift layout, a listed capacity of 10,000 lbs, and a Symmetric configuration. The specifications and available selections are arranged for straightforward technical comparison. Verify site clearances, utilities and vehicle lift points against current manufacturer documentation before use.
QuickJack™ 6000TLX Extended-Length Portable 6,000 lbs Car Lift Bundle
Selling price:$1,037.50
QuickJack™ 6000TLX Extended-Length Portable 6,000 lbs Car Lift Bundle
This portable vehicle lift listing covers QuickJack™ 6000TLX Extended-Length Portable 6,000 lbs Car Lift Bundle (5175638) with a listed capacity of 6,000 lbs. Key configuration, dimensional and utility data is organized below for comparison and project planning. Use the manufacturer’s current manuals to confirm floor, ceiling, electrical, air and vehicle-compatibility requirements for the selected configuration.
QuickJack™ 8000TL Portable 8,000 lbs Truck & SUV Lift Bundle
Selling price:$1,162.50
QuickJack™ 8000TL Portable 8,000 lbs Truck & SUV Lift Bundle
This portable vehicle lift listing covers QuickJack™ 8000TL Portable 8,000 lbs Truck & SUV Lift Bundle (5176009) with a listed capacity of 8,000 lbs. Key configuration, dimensional and utility data is organized below for comparison and project planning. Use the manufacturer’s current manuals to confirm floor, ceiling, electrical, air and vehicle-compatibility requirements for the selected configuration.
Tuxedo TP9KF-TUX 9K Symmetric Floor Plate 2 Post Car Lift
Selling price:$1,229.50
Tuxedo TP9KF-TUX 9K Symmetric Floor Plate 2 Post Car Lift
Tuxedo TP9KF-TUX is presented as a two-post vehicle lift with a listed capacity of 9,000 lbs. The product data includes a Symmetric configuration, plus the selectable configurations recorded for this model. Review every applicable measurement and utility requirement before matching the equipment to a vehicle, service bay or storage layout.
Auto Lift AL2-9K-ACX 9,000 lb. Asymmetric 2 Post Car Lifts
Selling price:$1,350.00
Auto Lift AL2-9K-ACX 9,000 lb. Asymmetric 2 Post Car Lifts
Auto Lift AL2-9K-ACX is presented as a two-post vehicle lift with a listed capacity of 9,000 lb. The product data includes an Asymmetric configuration, plus the selectable configurations recorded for this model. Review every applicable measurement and utility requirement before matching the equipment to a vehicle, service bay or storage layout.
