BendPak 10AP-168 Adaptable Clearfloor Adj-Width Ex-Tall ALI 2 Post Lift 10,000 lb. – New
SKU: 5175305
Selling price:$3,297.50
Confirm fit, current options, delivery access, and documentation with Lift Care before purchase.
- Capacity: 10000 lbs
- Configuration: Hybrid
- Overall width: 135" or 145" / 3,431 mm or 3,683 mm
Product Decision Guide
Key facts for this configuration
- Capacity
- 10000 lbs
- Configuration
- Hybrid
- Overall width
- 135" or 145" / 3,431 mm or 3,683 mm
- Maximum rise
- 69" / 1,753 mm | 75.5" / 1,918 mm
- Power requirement
- 220 VAC / 60 Hz. / 1Ph
Before You Order
Will this lift fit your bay and workflow?
Use the exact selected model and current manufacturer documentation to confirm the installation site, vehicle, utilities, and receiving plan.
Request a Product Fit CheckVehicle & Capacity
Confirm vehicle weight, weight distribution, wheelbase, and manufacturer lift points.
Bay & Clearances
Check overall width, length, ceiling height, door travel, and working clearance.
Floor & Utilities
Verify concrete, anchoring, electrical, and air requirements in the current manual.
Freight Receiving
Prepare carrier access, an available contact, and suitable unloading equipment.
BendPak 10AP-168 Adaptable Clearfloor Adj-Width Ex-Tall ALI 2 Post Lift 10,000 lb. – New
Selection data for this BendPak two-post vehicle lift is grouped by identity, physical size, required utilities and configuration. The cataloged capacity is 10,000 lb. Cross-check the chosen model against the intended vehicle and work area.
Key product facts
- Manufacturer: BendPak
- Model: 10AP | 10AP-168 | 10APX | 10APX-181
- SKU: 5175305
- Lift format: two-post vehicle lift
- Listed capacity: 10,000 lb
- Configuration: Hybrid
- Power or motor requirement: 220 VAC / 60 Hz. / 1Ph
- Manufacturer-listed certification status: BendPak product data lists this model as ALI certified; verify the current certification record before publication.
Design and functional details
- Capacity detail: 10,000 lb. lifting capacity.
- Design detail: extra-tall 168" overall height.
- Design detail: adjustable width top beam (135" or 145" wide).
- Lifting interface: bi-metric™ swing arms switch between symmetric and asymmetric configurations without arm changes.
- Safety design: aSARS automatic arm restraint system with over 2,000 lbs. of holding force.
- Lifting interface: triple-telescoping arms with drop-end design and reach.
- Safety design: automatic safety lock system with single-point release.
- Design detail: clear-floor design.
Included equipment
- 4-Piece screw pads and adapter holder
- Installation manual with detailed instructions and diagrams
- Column-mounted adapter racks
- 4-Piece Screw Pads & Adapter Holder
Available configurations and accessories
- Model: 10AP; 10AP-168; 10APX; 10APX-181
Technical specifications
| Specification | Recorded value |
|---|---|
| Symmetric/Asymmetric | Hybrid |
| ALI | Yes |
| Weight Capacity | 10000 lbs |
| Model | 10AP | 10AP-168 | 10APX | 10APX-181 |
| Lifting Capacity: (*) | 10,000 lbs. (4,536 kg) |
| A – Max Rise | 69" / 1,753 mm | 75.5" / 1,918 mm |
| B – Rise + Pad Only | 73" / 1,854 mm | 79.5" / 2,007 mm |
| C – Rise + Pad + 63 mm Adapter | 82.5" /2,096 mm | 89" / 2,261 mm |
| D – Min. Height + Pad | 4" /102 mm |
| Time to Full Rise | ≈45 seconds |
| E – Height Overall | 145" /3,683 mm | 168" / 4,267 mm | 157" / 3,988 mm | 181" / 4,597 mm |
| F – Width Overall | 135" or 145" / 3,431 mm or 3,683 mm |
| G – Outside Column Width | 127.5" or 137.5" / 3,239 mm or 3,493 mm |
| H – Inside Columns | 108.5" or 118.5" / 2,756 mm or 3,010 mm |
| I – Drive-Thru Clearance | 97.5" or 107.5" (2,477 mm or 2,731 mm) |
| J – Floor To Overhead Switch | 140" / 3,556 mm | 163" / 4,140 mm | 152" / 3,861 mm | 176" / 4,470 mm |
| K – Front Arm Reach (Max) | 50" / 1,270 mm |
| K – Front Arm Reach (Min) | 24.5" / 622 mm |
| K – Rear Arm Reach (Max) | 59.25" / 1,505 mm |
| K – Rear Arm Reach (Min) | 32" / 813 mm |
| Max Load Per Arm | 2,500 lbs. / 1,134 kg |
| Screw Pad Adjustment | 2" / 51 mm |
| Motor | 220 VAC / 60 Hz. / 1Ph |
| Noise | <70 dB |
Manufacturer warranty reference — verification required
Warranty information recorded for BendPak lists: structural components: 5 years; hydraulic cylinder: 2 years; limited manufacturer coverage: 1 year; power unit: 1 year; labor: 1 year. These are manufacturer terms and are not coverage provided by Lift Care, Inc. Confirm the current policy, eligibility, registration requirements and exclusions with the manufacturer before publication.
Compatibility and site review
Confirm vehicle lift points, weight distribution, clearances, floor conditions and required utilities against the current manufacturer manuals for the exact configuration selected. Product specifications can vary by model, voltage, height, length, runway, arm or accessory choice.
| Brand | BendPak |
|---|---|
| Item | Product |
| Symmetric/Asymmetric | Hybrid |
| Weight Capacity | 10000 lbs |
| Model | 10AP, 10AP-168, 10APX, 10APX-181 |
| Lifting Capacity: (*) | 10,000 lbs. (4,536 kg) |
| A - Max Rise | 69″ / 1,753 mm, 75.5″ / 1,918 mm |
| B - Rise + Pad Only | 73″ / 1,854 mm, 79.5″ / 2,007 mm |
| C - Rise + Pad + 63 mm Adapter | 82.5″ /2,096 mm, 89″ / 2,261 mm |
| D - Min. Height + Pad | 4″ /102 mm |
| Time to Full Rise | ≈45 seconds |
| E - Height Overall | 145″ /3,683 mm, 168″ / 4,267 mm, 157″ / 3,988 mm, 181″ / 4,597 mm |
| F - Width Overall | 135″ or 145″ / 3,431 mm or 3,683 mm |
| G - Outside Column Width | 127.5″ or 137.5″ / 3,239 mm or 3,493 mm |
| H - Inside Columns | 108.5″ or 118.5″ / 2,756 mm or 3,010 mm |
| I - Drive-Thru Clearance | 97.5″ or 107.5″ (2,477 mm or 2,731 mm) |
| J - Floor To Overhead Switch | 140″ / 3,556 mm, 163″ / 4,140 mm, 152″ / 3,861 mm, 176″ / 4,470 mm |
| K - Front Arm Reach (Max) | 50″ / 1,270 mm |
| K - Front Arm Reach (Min) | 24.5″ / 622 mm |
| K - Rear Arm Reach (Max) | 59.25″ / 1,505 mm |
| K - Rear Arm Reach (Min) | 32″ / 813 mm |
| Max Load Per Arm | 2,500 lbs. / 1,134 kg |
| Screw Pad Adjustment | 2″ / 51 mm |
| Motor | 220 VAC / 60 Hz. / 1Ph |
| Noise | <70 dB |
| Delivery Options | No, I Don’t Have a Forklift Please Call me to Discuss Options., I have a forklift for unloading at my listed shipping address., Local Freight Terminal Pick-Up “Preferred” |
| Residential, or business address? | Delivery address is in a business zone, Delivery address is in a residential zone |
| Delivery Notice | I want a 24 hour Delivery Notice, I don’t want a 24 hour Delivery Notice |
Delivery Information
Plan for delivery before your lift arrives
Lift Care ships only within the United States and coordinates freight through Logistica Cargonam. Product-specific cost and timing are confirmed before ordering.
United States delivery
Orders are shipped only to destinations within the USA.
Shipping confirmation
Delivery cost and freight requirements are confirmed for the product and destination before ordering.
Heavy-freight receiving
Prepare carrier access, an available receiving contact, and suitable unloading equipment.
Inspect at delivery
Review the freight condition and document visible damage or missing parts before the carrier leaves.
Documents & Support
Review the exact product information
Specifications can change. Confirm the selected model against current manufacturer documents before installation or use.Related products
Katool KT-H105 Symmetric 2 Post Floor Plate Car Lift 10,000 lbs - Blue
Selling price:$1,099.50
Katool KT-H105 Symmetric 2 Post Floor Plate Car Lift 10,000 lbs – Blue
Katool KT-H105 is a two-post vehicle lift with a listed capacity of 10,000 lbs. Its product data identifies a Symmetric configuration, while the specification table records model-specific dimensions, utilities and available configurations. Review vehicle, bay and floor requirements against current manufacturer documentation before selection.
AMGO® BP-9 Floor Base-Plate 2 Post Lift 9,000 lbs
Selling price:$1,167.50
AMGO® BP-9 Floor Base-Plate 2 Post Lift 9,000 lbs
For buyers comparing two-post vehicle lifts, AMGO Hydraulics BP-9CA combines a listed capacity of 9,000 lbs with a Symmetric configuration. The listing organizes the key dimensions, power information and configuration choices in a concise format. Confirm compatibility with the intended vehicle and work area using the manufacturer’s current technical instructions.
Katool KT-H100 Symmetric 2 Post Floor Plate Car Lift 10,000 lbs - Red
Selling price:$1,249.50
Katool KT-H100 Symmetric 2 Post Floor Plate Car Lift 10,000 lbs – Red
Katool KT-H100 brings together a two-post vehicle lift layout, a listed capacity of 10,000 lbs, and a Symmetric configuration. The specifications and available selections are arranged for straightforward technical comparison. Verify site clearances, utilities and vehicle lift points against current manufacturer documentation before use.
Torin TRJR-245LC TCE 220V 2 Post Floor Plate Lift 10,000 lbs.
Selling price:$1,009.50
Torin TRJR-245LC TCE 220V 2 Post Floor Plate Lift 10,000 lbs.
Torin USA TRJR-245LC is a two-post vehicle lift with a listed capacity of 10,000 lbs. Its product data identifies a power specification of 3HP, while the specification table records model-specific dimensions, utilities and available configurations. Review vehicle, bay and floor requirements against current manufacturer documentation before selection.
QuickJack™ 6000TL Portable 6,000 lbs Car Lift Bundle
Selling price:$1,012.50
QuickJack™ 6000TL Portable 6,000 lbs Car Lift Bundle
QuickJack™ 6000TL Portable 6,000 lbs Car Lift Bundle is a portable vehicle lift with a listed capacity of 6,000 lbs. Its product data identifies the principal dimensions and operating requirements, while the specification table records model-specific dimensions, utilities and available configurations. Review vehicle, bay and floor requirements against current manufacturer documentation before selection.
AMGO® Hydraulics LR10 Low-Rise Portable Lift 10000 lbs.
Selling price:$1,125.00
AMGO® Hydraulics LR10 Low-Rise Portable Lift 10000 lbs.
AMGO Hydraulics LR10 is presented as a portable vehicle lift with a listed capacity of 10,000 lbs. The product data includes a power specification of 1.0HP, 110V/60Hz - 30 amp Required, single phase, plus the selectable configurations recorded for this model. Review every applicable measurement and utility requirement before matching the equipment to a vehicle, service bay or storage layout.
Nationwide NW-9KACD Asymmetric & Symmetric Two Post Car Lift 9,000 lbs
Selling price:$1,397.50
Nationwide NW-9KACD Asymmetric & Symmetric Two Post Car Lift 9,000 lbs
Nationwide NW-9KACD is presented as a two-post vehicle lift with a listed capacity of 9,000 lbs. The product data includes a maximum lifting height of 72"- (77.75" w/Adapters), plus the selectable configurations recorded for this model. Review every applicable measurement and utility requirement before matching the equipment to a vehicle, service bay or storage layout.
Auto Lift AL2-9K-FX 9,000 lb. 2 Post Floor Plate Car Lift
Selling price:$1,310.00
Auto Lift AL2-9K-FX 9,000 lb. 2 Post Floor Plate Car Lift
Auto Lift AL2-9K-FX is a two-post vehicle lift with a listed capacity of 9,000 lb. Its product data identifies a Symmetric configuration, while the specification table records model-specific dimensions, utilities and available configurations. Review vehicle, bay and floor requirements against current manufacturer documentation before selection.
